INFORMATION
This page is for information about the various engine management systems that HALTECH offer.
Information courtesy of HALTECH.
Last Updated : 27th July, 1999
IT IS NOT AVAILABLE YET, SO PLEASE DO NOT ASK FOR ANY MORE INFORMATION FROM EITHER ME OR HALTECH.
Screenshot
1 - 3D Fuel Maps
Screenshot
2 - 3D Ignition Maps
Screenshot
3 - 3D Ignition Maps , different view angle
Screenshot
4 - Engine Data Gauges
Patch
Update
A
patch update file has been released to fix the problem of a runtime error
on some fast 200MHz+ machines trying to run the programming software.
Download : TPPATCH.ZIP 9k
Extract the file
to your Haltech directory where the programming software .EXE
file is located. After extraction you must go to the DOS prompt then go
to the same directory as the .EXE file and type in :
TPPATCH FILE.EXE
Where FILE.EXE is
the name of your Haltech software.
For instance , is
you have E6A software and the file is called E6A.EXE , then
you would type in TPPATCH E6A.EXE and the patch will run itself which takes
a few seconds.
If you have any
difficulty then do not hesitate to email
or ICQ me about it.
Haltech
F9
/ F9-A Fuel Computer
The Haltech F-9
is a fuel only engine management system suited to engines that already
have their own ignition system , such as older EFI engines that still run
a distributor.
Click
HERE
for more Information on the Haltech F9
Haltech
E6-A
Fuel / Ignition Computer
The Haltech E-6a
is a comprehensive fuel and ignition engine management system for the professional
or enthusiast. It is suited to modern multiple ignition coil engines or
custom made engine conversions.
Click HERE for more Information on the Haltech E6-A
Haltech
E6-S
Fuel / Ignition Computer
The new E6-S is
a redesign of the existing E6-A with a few major updates. Controlling both
Fuel and Ignition systems it is the complete solution for your engine management
needs.
Click HERE for more information on the Haltech E6-S
Haltech
E6-GM
Fuel / Ignition Computer
The Haltech GM is
a comprehensive fuel and ignition engine management system with a direct
plug-in setup for Delco computer equiped cars. Offering the same levels
of adjustment as the E6-A it is a perfect solution for modified vehicles
running the Delco. See the E6A information linked below.
Click HERE for more Information on the Haltech E6-GM
Haltech
IG5
Ignition Computer
A stand-alone ignition
management system. Basically the ignition-side only of the E6 systems it
is perfect for those wishing to update at a later date from a fuel-only
system.
Click HERE for more information on the Haltech IG5
Haltech
HaligatorTM
The Haligator is
an electronic programmable boost controller and extra injector fueller.
Click HERE for more information on the Haligator
PLEASE NOTE THAT THIS PRODUCT IS NOT AVAILABLE YET ! DO NOT TRY TO CONTACT ME OR HALTECH REGUARDING THE HALIGATOR AS NO MORE INFORMATION WILL BE GIVEN , AND YOU WILL GENERALLY MAKE US PISSED OFF WITH YOU !
Demo
Software
A DEMO version of the Haltech programmable
software is now available for download. Just unzip the file and run the
DEMO.EXE file. Hit "Y" to go online as this demo version has a simulated
running engine so you can see how it all works. To see the menus on which
are on top, hold down the ALT key and then hit the corresponding first
letter for that menu, eg. ALT-F to bring up the FILES menu. You can also
download some of my basic sample maps that may help point you in the right
direction at the bottom of this page.
Download
DOS Demo Software : HALDEMO.ZIP
Haltech
Installation
Click
HERE
to see how to install a Haltech F9
Latest
Version Information
15th October, 1997 : The
E6-A and F9-A are currently on V4.1, which is an update from V2.55.
This allows the one Version of software to communicate with both the old
ECUs and the newer Series 2 ECUs.
Thanks Justin @ Haltech.
1st October, 1998 :Damn , this has been a long time since I updated this page. Sorry about that ! Latest version of the programming software and firmware are as follows.
25th July, 1999. Patched versions of the software
E6-A and
E6-GM are at V5.05
E6-S
is
at V5.05
F9 and
F9-A are at V5.05
F3 and
F7-C stopped at V5.4
IG5 is
at V1.4
Haltech are hard at
work at creating newer systems , so check back here every now and again
to see what is new. This page will be updated more often from now on ...
promise... I really mean it....
MAP
Database
Here I am starting
a database for saved MAPS. If you have any MAPS running on your car that
you are extremely happy with please email them to me and I will include
them here for others to download and try. Please send a short description
of the motor and any mods you have done to it , along with what version
software you are using.
Click
HERE
to go to the Database.
Haltech
HQ
Haltech have moved in to their new modern
premises. Take a look...
Reception *
Note that the secretary is hiding behind the desk. Click the picture above
to see her *
All the hard working guys in the workshop.
Doing some development work on new ECU
designs using a Toyota V8.
