Regency Railings baluster elements are available FLAT (for installation on straight staircases and straight railings) or RADIUSED (for installation on curved staircases with a minimum of 28" radius and curved level railings with a minimum of 24" radius).

Regency Railings balusters were designed to meet national building codes and most local codes including the 4" sphere when assembled in accordance with the layouts in our drawings.

Regency Railings offers a variety of different hand forged ornamental designs but we are unable to produce custom ironwork, supply any handrails, apply the finish paint or provide the installation service.

Regency Railings develops all designs to meet national industry code requirements.  However, building code requirements and safety rules vary from one locality to another and it is incumbent upon the architect, builder, designer and installer to familiarize themselves and comply with these codes and regulations.

Dimensions and other data published in this Web site have been ascertained with great care but cannot be guaranteed. Regency Railings liability is limited to replacement of defective product only with no other warranties either expressed or implied.

Regency Railings policy is a continual improvement in design and manufacturing to assure an even finer product.  Therefore, we reserve the right to institute design and dimensional changes that will not effect the original code compliance without prior notification.

All pictures, drawings and information herein are the property of  Regency Railings and are protected by U.S Patent Nos.  5,820,111; 6,059,269 and other copy rights and patents current or pending. They are intended for use in planning and design prior to using our products. Any use or reproduction for other purposes is strictly prohibited and violators will be prosecuted.